Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Prepare the docking speaker
Pull the stand upwards from the unfixed end.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the AC adaptor, Make sure that you
have completed all other connections.
Connect the AC power adaptor to:
•
the power supply socket on the back of
the docking speaker.
•
the wall power outlet.
10V DC
Built-in Battery
The docking speaker can also operate on built-
in rechargeable battery.
» The speaker mute when the battery level
is low.
Battery
LED indicator
power
Low
Flashing fast
Medium
Flashing slowly
Full
Steadily on
To recharge the built-in battery:
•
Connect the unit to the power supply.
Note
•
Use only the supplied AC adapter to charge the
battery.
Turn on
Slide
on the docking speaker to the ON
position.
» The LED indicator turns on.
The speaker turns to standby mode when there
is no audio detected for over 15 minutes.
EN
6
Advertisement
Table of Contents
