Table of Contents
Advertisement
30
Cyclades® CS Console Server Installation, Administration and User Guide
To connect to the console server:
This procedure logs you into the console server as a Regular User in an SSH session.
1.
Go to Applications - Connect in Expert mode.
2.
Click the Connect to CS400X radio button.
3.
Click the Connect button. A Java applet viewer appears.
NOTE: You cannot authenticate unless you enable allow root access.
To connect to a device through a serial port:
1.
Go to Applications - Connect in Expert mode.
2.
Click the Serial radio button.
3.
Select a port number or alias from the Serial pull-down menu.
4.
Click Connect. A Java applet viewer appears. If authentication is specified for the selected
port, you are prompted to log in. If not, you are logged in automatically.
Terminal Profile menu
On the Terminal Profile Menu under Applications, you can define a terminal command menu. This
menu is used if a terminal is connected to one of the serial ports and is configured as a local
terminal. A server terminal configured as a local terminal launches a session directly on the console
server with access to the Linux commands on the console server unless you configure a menu here.
Figure 5.3: Expert - Applications - Empty Terminal Profile Menu
The menu can contain any command recognized by the Linux operating system on the console
server. The most common use of this feature is to create multiple menu options for launching SSH
sessions on remote hosts.
When you click Add, the Add Option dialog box appears.
Advertisement
Table of Contents
