Energizer ER-HT400 Specifications

Congratulations on your new Energizer® ER-HT400 UPS Power Protection system.
This product is specifically designed for home theater. With the newest technology, this series can operate
under a wide range of input utility power while maintaining steady output voltage. Why is this important?
Some equipment requires consistent backup power under high utility fluctuation. Because the number of
home theater peripherals increase, additional surge protected outlets are provided to protect your television,
satellite system, or other devices from surges, spikes, and electromagnetic interference.
Specifications
Color Black
Run Time 8~32 minutes
Surge Protected vs.
3:3
Battery Backup Outlets
Warranty 3 years
Internet Ready/Phone/Fax
RJ11/RJ45
Modem hookups
VA Rating 400
Watts 200
Input/Output Voltage 115
Frequency 60
Interface Port (USB or Serial) USB
3
2
4
5
1
13
SURGE PROTECT FAULT
FAX/MODEM
10
16
Your box should include the following:
UPS unit and Input Power Cord
User's Manual
Telephone Line Communication Connection Cord
Remote Monitoring Software
Waveform Type
Joules (surge capacity)
Overload Protection
Recharge Time (typical)
Visual Indicators (lights)
Audible Indicators
Connected Equipment
Guarantee
Unit Dimensions/Weight
Compliance
Cord Length
7
8
12
SITE WIRE FAULT
AC/CB
6
11
15
ER-HT400
Stepped Sinewave
2433
Features:
Compact light weight design
Yes
Intelligent microprocessor control
<=8hrs of 90% Unparalleled communication with your computer
Provides accurate information for control and
4
monitoring power
Overload protection and alarm
4
Smart AVR for low and high input line voltage
Fax/modem/cable/satellite surge suppression port
3 years
Site-Wiring-Fault indicator
Easy battery replacement mechanism
12.2 x 6.8 x 3.7
CUL
6 feet
Item Panel Indicator
1
On/Off Switch
AC Normal/On
2
Battery Indicator (green)
Buck Mode Indicator
3
(yellow)
Boost Mode Indicator
4
9
(yellow)
Overload/Abnormal Indicator
5
(red)
6
Input Circuit Breaker
7 Backup Power Outlets
8 Surge Protection Outlets
USB port
9
14
Telephone Surge
10
Protection Port
11
AC Power Input
Site Wire Fault
12
Indicator (Red)
Surge Module Fault
13
Indicator (Red)
14
Coax Surge Protection Port
15
Battery Cover
16
Surge Module
Description
Turns UPS system on & off
Indicate the AC is normal or
that the UPS is in battery mode
Measures and restores normal
AC voltage if it is too high
Measures and restores normal
AC voltage if it is too low
Indicates the UPS output is
overloaded or that there is
UPS failure
Protect against UPS
system overload
Provide output power
to computer device
Provides a noise filtering function
to computer peripherals
Allows remote monitoring and
control via serial interface ports
Suppress the spoke voltage
on the telephone line
Connects to input utility power
through the input power cord.
Indicate missing ground
or polarity reversed
Indicates an extreme
level of surge
Provides protection for
cable/satellite inputs
Provides access to batteries
for replacement
Indicates a high-level
of surge