Advertisement
OPERATING MANUAL AND USER GUIDE
CONNECTION DIAGRAM
MONO MAIN SYSTEM WITH TWO MONITORS
connecting multiple v series speakers together in a mono-main and stage monitor configuration using a single,
dual channel amplifier.
NOTE: This configuration represents a 4 ohm load to each output channel of the amplifier.
V15B and V18B System Set-ups
V15B and V18B Stereo Sub with Passive Satellites
This is example shows a system with a single power ampliyer connecting the subs and satellites in stereo.
The mixer's left and right outputs are connected to the inputs of the power amplifier using shielded cable. The
outputs of the amplifier are connected to the V15B or V18B INPUT using un-shielded speaker cable. Next, run
an un-shielded speaker cable from the V15B's or V18B's EXTENSION OUTPUT to the two satellite speakers.
For details on wiring your speaker cables.
IMPORTANT NOTE: To avoid any possible damage to your amp and speakers, be sure to check the
manufacturer's owners manual to confirm your power ampliyer is capable of operating at 2 ohms.
7
Hide quick links:
Advertisement
