Multi-Function Button; Turning The Device On And Off; Volume Adjustment; Pairing - Kyocera Wireless Portable Speaker User Manual

Wireless portable speaker with headset
Table of Contents

Advertisement

Battery use and standby times
Headset
Standby time is up to 100 hours.
Talk time is up to 4 hours.
Charging time is around 2.5 hours.
Whole unit (headset & speaker base)
Standby time is up to 200 hours.
Talk time is up to 6 hours.
Charging time is around 4 hours
Note: If the headset and speaker base both need to
be recharged, charge the base for five
minutes prior to charging both.

Multi-function button

The function of
depends on how long you
keep the button pressed.
A short-press is less than one second
A long-press is two to five seconds

Turning the device on and off

Turn on
Long press
until blue light blinks and the
Wireless Portable Speaker beeps once, then release
the button. The power is on.
The mobile device will ask if you would like to
connect to the Wireless Portable Speaker with
Headset. Confirm the connection.
Turn off
Long press
until red light blinks quickly, and
the device beeps once, then release the button. The
power is off.
The mobile device will disconnect from the Wireless
Portable Speaker with Headset.
Wireless Portable Speaker with Headset

Volume adjustment

During a call, you can adjust the volume using
and/or
.
1. Press
to increase volume.
2. Press
to decrease volume.
Notes:
There will be a low, short sound each time
you press
or
tone will increase or decrease as you press
the buttons.
Please set your speaker to a suitable volume
between maximum and minimum.
You can also use the volume buttons of
your mobile phone to adjust the volume of
the speaker.

Pairing

Pairing is the process of linking the Wireless
Portable Speaker with Headset with your Bluetooth
wireless technology enabled mobile phone.
Before you use the speaker with your mobile phone,
the devices must be paired.
After pairing is complete, the speaker can only be
used with the mobile phone with which it was
paired. If you wish to use the speaker with a
different mobile phone, you must repeat the pairing
process with the new mobile phone. When you do
this, the speaker will no longer work with the
previous mobile phone.
; the volume of this
5

Advertisement

Table of Contents
loading

Related Products for Kyocera Wireless Portable Speaker

This manual is also suitable for:

Portable speakers

Table of Contents