Advertisement
SHIFT Key Functions
There are many functions you can access by holding the SHIFT key and pressing another key on the microKORG. Below is a
listing of those functions. For more information on each function please refer to the microKORG Owner's Manual starting on
page 59.
Copy Timbre – SHIFT and PROGRAM NUMBER 1
Swap Timbre – SHIFT and PROGRAM NUMBER 2
Initialize Program - SHIFT and PROGRAM NUMBER 3
Initialize Level (Vocoder programs only) - SHIFT and PROGRAM NUMBER 1
Initialize Pan (Vocoder programs only) - SHIFT and PROGRAM NUMBER 2
MIDI Filter - SHIFT and PROGRAM NUMBER 4
Control Change Assign - SHIFT and PROGRAM NUMBER 5
MIDI Data Dump - SHIFT and PROGRAM NUMBER 6
Factory Preload - SHIFT and PROGRAM NUMBER 7
Write Protect - SHIFT and PROGRAM NUMBER 8
Timbre Solo – SHIFT and FORMAN T HOLD/TIMBRE SELECT
Switch Edit Select – SHIFT and A SIDE B
Inc/Dec Parameter Value – SHIFT and OCTAVE SHIFT UP(Inc) or DOWN(Dec)
Compare – SHIFT and OCTAVE SHIFT UP and DOWN simultaneously
Demo Mode – SHIFT and ARPEGGIATOR ON/OFF
Important Owner's Manual references:
There are many important references to modes and applications in the microKORG Owner's Manual. Some of these references
are listed below:
EDIT SELECT 1 Parameters
EDIT SELECT 2 Parameters
Changing MIDI Control Change Numbers
Syncing to External MIDI Clock
Shift Key Functions
5
microKORG EasyStart
pgs. 15 - 29
pgs. 30, 39 – 47, 51
pg. 61
pg. 51
pgs. 59 - 64
Advertisement
