Advertisement
Quick Links
INSTRUCTIONS-PARTS LIST
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
Pressure Roller Equipment
300 psi (21 bar) MAXIMUM WORKING PRESSURE
Operate your pump at the lowest pressure needed for sufficient paint supply to your roller
Adjustable Extension Roller Kit 218–625
Includes Roller Frame, 18–36 in. Extension
Tube, 3/8 in. nap Roller Cover and 45 Gun
Adapter
Adjustable Extension Tubes
218–775 18–36 in. (0.45–0.9 m)
218–776 3–6 ft (0.9–1.8 m)
218–777 6–12 ft (1.8–3.7 m)
*45 Gun Adapter 218–932
1/4 npt(m) x 7/8 UNF(F)
*Flush Kit 218–944
Uses standard garden hose to flush water–
base paints from the Extension Tube and Roll-
er Frame
*360 Straight Swivel 218–931
1/4 npt(m) x 1/4 npsm(f) swivel
*Gun Adapter Kits
218–945 For guns with 3/4–20 nozzle
threads (Binks)
218–946 For guns with 1–1/16–16 nozzle
threads (Wagner)
Tip Gaskets 218–600
Package of 5 tip gaskets
*See packaging for specific installation instruc-
tions
NOTE: For a leak–free connection, use pipe
sealant on all male threads.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
Graco Inline
Dispensing
Valve
for non–Graco guns
Graco Gun
COPYRIGHT 1995, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
307–713
Supercedes Rev. C
Roller Cover
&
Roller Frame
(See Manual
307–755 for
parts)
Adjustable
Extenstion
Tube
360
Straight
Swivel
Gun
Adapter
45 Gun
Kit
Adapter
Flush
Kit
Rev. D
Tip Gasket
05881
Advertisement
Related Manuals for Graco 307-713
Summary of Contents for Graco 307-713
- Page 1 INSTRUCTIONS-PARTS LIST This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Pressure Roller Equipment 300 psi (21 bar) MAXIMUM WORKING PRESSURE Operate your pump at the lowest pressure needed for sufficient paint supply to your roller Adjustable Extension Roller Kit 218–625 Includes Roller Frame, 18–36 in.
- Page 2 EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. INSTRUCTIONS Do not modify the tube or roller frame or use parts not designed for this equipment. If the adjustable extension tube starts to extend during use, stop rolling immediately and engage the gun safety latch.
- Page 3 ADJUSTABLE EXTENSION ROLLER KIT 218–625 Installation 1. Assemble the roller kit as shown in Fig 2. Be sure the gasket is in place between the gun and adapter. 2. Extend the tube to the desired length and tighten the locknut securely. NOTE: Always allow cold equipment to warm to room temperature before using.
- Page 4 WARNING INJECTION HAZARD Keep your hands and body away form the roller frame when flushing. High pressure fluid emitted from the holes in the frame could cause an injection injury. 5. Point the extension tube and roller frame away from yourself or any other person. Then turn on the pump and flush the sys- tem thoroughly as described in your sepa- rate pump instruction manual, using the...