Select Broadband (PPPoE) and click
Enter your User name and,
Password, and Connection name.
Click Close to finish the
Click the network icon in the taskbar
and click the connection you just
Enter your user name and password.
Click Connect to connect to the
Configuring a static IP network connection
To configure a static IP network connection:
Repeat steps 1 to 4 of the previous section Configuring a dynamic IP/PPPoE
Click Use the following IP address.
Enter the IP address, Subnet mask and
Gateway from your service provider.
If needed, enter the preferred DNS Server
address and alternative address.
When done, click OK.