On/Off Switching; Mode Switching - JetBeam PA10 User Manual

4. Although the PA10 is compatible with a single 14500 Li-ion
rechargeable battery, output current is markedly higher
(over 2 amps) when used in this mode. Caution must be
exercised and only high performance Li-ion rechargeable
batteries may be use. Using substandard batteries will
either activate the protection circuit, shutting the flashlight
down or in the worst case scenario potentially cause an
explosion.

ON/OFF Switching:

Switch ON: Press the button at the tailcap until
tailcap "click" on.
Switch OFF: Press the button at the tailcap until a
second "click" is heard. Light is now off.

Mode switching

Users can select Tactical mode and User-defined
mode smoothly. To access Tactical mode, simply
tighten the head.
Alternatively, loosen the head to access User-
defined mode. In User-defined mode, users can
choose customized brightness levels and a
multitude of functions.
Tactical mode
Tightening the head, the PA10 access Tactical
mode, emitting a continuous maximum output
of 650 lumens. In this mode, the flashlight has
tactical lighting function.
Lightly press the button at the tailcap. The
flashlight is turned on. Release the button to turn
it off. Moreover, the output will not be changed
even in long term use.