Table of Contents
Advertisement
2.
Enter a name for the recovery set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow keys to
3.
select Recovery, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the recovery set. The SELECT DISKS screen appears.
Port Drive Model
0
ST3300656SS
1
ST3300656SS
2
ST3300656SS
3
ST3300656SS
Select 1 Master and 1 Recovery disk to create volume.
[[ ↑↓ ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
5.
Use the up/down arrow keys to select a drive, press <TAB> to select a Master
disk, and then press <SPACE> to select a Recovery disk. A small triangle
marks the selected drive. Press <Enter> after completing your selection.
When the Sync item is selected, use the up/down arrow keys to select a sync
6.
option that you want and press <Enter>.
When the Create Volume item is selected, press <Enter>. The following
7.
warning message appears.
8.
Press <Y> to create the recovery set and return to the main menu, or <N> to
go back to the CREATE VOLUME menu.
If a recovery set is created, you cannot add more RAID sets even when you
have more non-RAID disks installed in your system.
ASUS Z9PE-D8 WS
[ SELECT DISKS ]
Serial #
HWAS0000991753TR
37VN00009846RAJ1
397600009846UEDY
GWC50000991756G6
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Size
Status
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
5-29
Advertisement
Table of Contents
