Rear View Monitor System - Toyota 4Runner 2005 Owner's Manual

CAUTION
D
When doing the circling calibration,
be sure to secure a wide space,
and watch out for people and ve-
hicles in the neighborhood. Do not
violate any local traffic rules while
performing circling calibration.
D
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
254
'05 4Runner_U (L/O 0504)

Rear view monitor system

The rear view monitor system assists
the driver by displaying images of the
rear of the vehicle during backing up.
The displayed image on the screen is
a horizontally reversed mirror image of
the inside rear view mirror.
To display the rear view on the screen,
place the selector lever in the "R" posi-
tion when the ignition switch in the
"ON" position.
If you move the selector lever out of the
"R" position, the screen returns to the
previous screen. Operating another func-
tion of the navigation system will display
another screen.
The rear view monitor system is an auxil-
iary device intended to back up. When
backing up, be sure to check behind and
all around the vehicle visually.
CAUTION
D
Do not rely entirely on the rear
view monitor system.
Use caution just as you would when
backing up any vehicle.
D
Never back up while looking only at
the screen. The image on
screen may differ from actual con-
ditions. If you back up while look-
ing only at the screen, you may hit
a vehicle or have an unexpected
accident. When backing up, be sure
to check behind and all around the
vehicle visually and with mirrors
before proceeding.
NOTICE
z Do not use the system when the
back door is not completely closed.
z If the back of the vehicle is hit, the
position and mounting angle of the
camera may slip. Be sure to have
the camera's position and mounting
angle checked at your Toyota deal-
er.
z If the temperature changes rapidly,
such as when hot water is poured
on it in cold weather, the system
may not operate normally.
the