Advertisement
8. Turn engine ON and start engine or motor.
Set pump switch ON.
9. Turn prime valve horizontal.
10. Turn pressure control up until motor begins
to drive pump. Hold gun against paint pail.
Take trigger safety OFF. Trigger gun until
flushing fluid appears.
11. Move gun to flushing pail, hold gun against
pail, trigger gun to thoroughly flush system.
Release trigger and put trigger safety ON.
12. Turn prime valve down and allow
flushing fluid to circulate for approxi-
mately 20 seconds to clean drain tube.
or
PAINT
FLUSH
20 SEC
309410
Advertisement
