Electrical Connection; Water Supply Connection - White Knight Washing Machine User Manual

You can adjust the level of your machine using its feet.
First, loosen the plastic adjustment nut away from the cabinet base.
Change the level by adjusting the feet upwards or downwards.
After level has been reached, tighten the plastic adjustment nut again
by rotating it upwards against the base of the cabinet.
Never put cartons, wooden blocks or similar materials under the
machine to balance irregularities of the floor.

ELECTRICAL CONNECTION

Your washing machine requires a 50Hz supply of 220-240Volts.
A special earthed plug has been attached to the supply cord of your
washing machine. This plug must be fitted to an earthed socket. The
fuse value fitted to this plug should be 13 amps. If you have any
doubts about your electrical supply, consult a qualified electrician.
THIS APPLIANCE MUST BE EARTHED.
Insert the machine's plug to a grounded socket which you can
easily reach.

WATER SUPPLY CONNECTION

Your machine is supplied with a single (cold) water inlet.
To prevent leakage from the connection joints, a rubber washer is
included in the hose packing. Fit this washer at the end of water inlet
hose on the tap side.
Connect the hose to the water inlet valve. Tighten the plastic
connector by hand.Please call a qualified plumber if you are unsure
about this.
4