Toyota Corolla 2005 Operating Manual page 284

High beam
(inside)
Low beam
(outside)
2. Turn the bulb base counterclockwise
to the front of the vehicle as shown.
276
'05 Corolla_U (L/O 0409)
3. Unplug the connector.
If the connector is tight, wiggle it.
4. Install a new bulb and connector
into the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2005 COROLLA from Sep. '04 Prod. (OM12891U)