Toyota Corolla 2004 Operating Manual page 72

3. Securely fasten the child restraint
system with the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 53 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
66
'04 Corolla_U (L/O 0306)
4. Outside anchor brackets only—
Replace the head restraint.
—Installation with child
restraint lower anchorages
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the rear seat.
The anchorages are installed in the clear-
ance between the seat cushion and seat-
back of both outside rear seats.
Child restraint systems complying with the
FMVSS225 or CMVSS210.2 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
2004 COROLLA from Oct. '03 Prod. (OM12859U)
are