Toyota Celica 2001 Operating Manual page 167

10. Reinstall the wheel ornament.
1. Put the wheel ornament into position.
Steel wheels—Align the cutout of
wheel ornament with the valve stem as
shown.
2. Then tap it firmly with the side or heel
of your hand to snap it into place.
CAUTION
Take due care in handling the orna-
ment to avoid unexpected personal
injury.
'01MY CELICA U (L/O 0008)
—After changing wheels
11. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
the
designated in Section 8. If the pressure is
lower, drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat
tire securely.
As soon after changing wheels as pos-
sible, tighten the wheel nuts to the torque
specified in Section 8 with
wrench. Have a technician repair the flat
tire and replace the spare tire with it.
CAUTION
Before driving, make sure all
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal in-
jury during a collision or sudden
braking.
2001 CELICA (20766U)
If your vehicle needs to be
towed—
(a) Towing with wheel lift type truck—
—From front
—From rear
a torque
(b) Using flat bed truck
the
167