Toyota Camry 2005 Operating Manual page 305

When the level reaches within the correct
range, install the filler cap hand- tight.
Oil quantity, L (qt., Imp. qt.):
2AZ- FE engine 1.0 (1.1, 0.9)
1MZ- FE and 3MZ- FE engines
1.5 (1.6, 1.3)
NOTICE
z Be careful not to spill engine oil on
the vehicle components.
z Avoid
overfilling, or the
could be damaged.
z Check the oil level on the dipstick
once again after adding the oil.
ENGINE OIL SELECTION
"Toyota Genuine Motor Oil" is used in
your Toyota vehicle. Use Toyota approved
"Toyota Genuine Motor Oil" or equivalent
to satisfy the following
viscosity.
Oil grade:
API grade SL "Energy- Conserving" or
ILSAC multigrade engine oil
Recommended viscosity:
SAE 5W- 30
engine
Outside temperature
'05Camry_U (L/O 0409)
SAE 5W- 30 is the best choice for good
fuel economy and good starting in cold
weather.
If SAE 5W- 30 is not available, SAE
grade and 10W- 30 may
should be replaced with SAE 5W- 30 at
the next oil change.
2005 CAMRY from Sep. '04 Prod. (OM33684U)
be used. However, it
305