Getting Started; Control Primare Units; Compatibility With Older Primare Models; Changing The Batteries - Primare C33 User Manual

getting stArted

The C33 allows you to control most of your Primare units with the same
remote control.
C o n t r o l p r i m A r e u n i t s
The six control buttons correspond to each unit:
Select amplifier mode
Select preamplifier mode
Select CD player mode
Press the appropriate control button to specify which unit you want to control, then press the
required function buttons.
C o m p A t i b i l i t y w i t h o l d e r p r i m A r e m o d e l s
AMP, CD, PRE, and PROC mode will operate all older Primare models as well.
There may be slight differences in functionality.
C h A n g i n g t h e b A t t e r i e s
Note: The batteries should be replaced with two alkaline type AAA 1.5 V batteries.
To do this proceed as follows:
•
Use a coin to remove the screw cap.
•
Remove the batteries from the battery compartment and replace with two alkaline type AAA
1.5 V batteries.
Ensure that you fit them with the + polarity end facing into the battery compartment. Please be
considerate to the environment when disposing of the old batteries.
•
Refit the screw cap.
C 3 3 u s e r g u i d e
Select BD32 Blu-ray player mode
Select the DAC32
Select processor mode