Page 2
Primare Systems AB. Primare is a trademark of Primare Systems AB. All rights reserved. All other product names are trademarks or registered trademarks of their respective owners.
Page 3
C O D E B U T T O N • Replace the batteries while holding down the STBY button. The CODE button allows you to select which Primare unit is controlled by the To restore PRE30 mode: C31 Remote Control.
Page 4
Introduction > C H A N G I N G T H E B A T T E R I E S If the CODE light does not illuminate clearly when you press the CODE button you should replace the C31’s batteries. Note: The batteries should be replaced with two alkaline type AAA 1.5 volt batteries.
Page 5
> This section explains how to use the C31 Remote Control to operate the control unit in your system, whether it is a Primare P30/SP30 Processor, a Primare Integrated Amplifier, or a Primare PRE30 Preamplifier. The following diagram shows the C31 Remote ]E The MUTE button mutes the sound.
Page 6
> This section explains how to use the C31 Remote Control to operate the CD or DVD player in your system, whether it is a Primare V20 DVD player, or a Primare D20 or D30.2 Integrated CD player. The following diagram shows the C31 Remote ]H The DIM button dims the front panel display.
Page 7
Operating a Primare FM stereo tuner > This section explains how to use the C31 Remote Control to operate a Primare T20 FM Stereo Tuner. The following diagram shows the C31 Remote ]B The DIM button dims the front panel display.
Need help?
Do you have a question about the C31.1 and is the answer not in the manual?
Questions and answers