Cary Audio Design SLP 05 Owner's Manual page 9

Back Panel – Preamplifier
Special Note: The balanced input and output XLR connectors follow the ITT Cannon pin out configuration.
This pin out calls for the shield to be wired to pin #1. The normal-phase (hot) is wired to pin #2. Pin #3 is
the inverted phase.
1. Cinema In from Processor – Right Channel RCA
2. Cinema In – Right Channel XLR
3. Tape In – Right Channel RCA
4. Tape Out – Right Channel RCA
5. Serial Number
6. Tape Out – Left Channel RCA
7. Tape In – Left Channel RCA
8. Cinema In from Processor – Left Channel XLR
9. Cinema In – Left Channel RCA
10. XLR1 input – Right Channel
11. XLR2 input – Right Channel
12. AUX1 input – Right Channel RCA
13. AUX2 input – Right Channel RCA
14. AUX3 input – Right Channel RCA
15. XLR Output – Right Channel
16. RCA Output – Right Channel
17. Power Supply – 6' multi conductor power cable going to matching power supply
18. RCA Output – Left Channel
19. XLR Output – Left Channel
20. AUX3 input – Left Channel RCA
21. AUX2 input – Left Channel RCA
22. AUX1 input – Left Channel RCA
23. XLR2 input – Left Channel
24. XLR1 input – Left Channel
9