Hardware Installation - D-Link DNS-321 Quick Install Manual

2-bay network storage enclosure
Table of Contents


1. Access the drive bays by sliding
the faceplate up until it unlatches
from the device.
2. Once the faceplate is unlatched,
pull it off of the device, exposing
the drive bays.
3. Insert a 3.5" SATA hard drive
into an available drive bay. Make
sure to align the drive connector
to the endpoint in the DNS-321.
Gently push the drive in until it

Hardware Installation

D-Link DNS-31 Quick Install Guide
Hardware Installation

Hide quick links:


Table of Contents

Table of Contents