Copying A Cs Group Image; Zooming An On-Screen Image - Casio Exilim EX-ZR700 User Manual

Copying a CS Group Image

Use the following procedure to copy an image in a CS group to a location outside of
the group.
1.
While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the "CS Frame Edit" menu.
2.
Use [8] and [2] to select "Copy", and then press [SET].
3.
Use [4] and [6] to display the image you want to copy.
4.
Use [8] and [2] to select "Copy", and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize

Zooming an On-screen Image

1.
In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2.
Rotate the zoom controller towards z ([) to
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. Rotate the zoom controller
towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
115
Zoom factor
Image area
Current display area
Viewing Snapshots and Movies