Water Connection - Bosch Washing Machine Instruction Manual And Installation Instructions

Water connection

Connecting the
water
Water inlet hose
40
Caution
Operate the washing machine with cold drinking
water only. Do not connect to the mixer tap of an
unpressurised hot water apparatus.
If in doubt, have the appliance connected by
a specialist.
The water inlet hose must not be
- kinked or crushed,
- modified or severed (strength is no longer guaran
teed).
Plastic threads must only be tightened by hand.
Do not remove the strainers from the water supply
hose.
Check the mains water pressure:
- The water pressure should be between 1 and
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
- f the water pressure is higher, install a pressure
reducing valve.
Connect the water supply hose
q to the rear panel of the washing machine and ...