Table of Contents
Advertisement
6. Select the "Advanced" tab. You can choose the fragmenta-
tion threshold to define the maximum data frame size your
adapter will transmit. When the packet error rate is high, you
may set the threshold value to transmit shorter frames. You
may select RTS/CTS threshold to define when will your
adapter send out RTS/CTS frames to reserve bandwidth for
transmission. By using the RTS/CTS function, you may re-
quest bandwidth from AP to allow you have better chance to
send out your data. For the Security, it's only applicable
while WEP is enabled. For the Authentication Type, the cur-
rent supported algorithms are Open System, Shared Key, and
Auto. The algorithm will be invoked when associated to Ac-
cess Point. To associate to the desired Access Point you must
set the same algorithm as the one of the desired Access Point.
30
Advertisement
Table of Contents
