Table of Contents
Advertisement
ing an Access Point, while the Ad-Hoc mode allows wireless-
to-wireless, peer-to-peer communication. If you choose
Infrastructure, the SSID should have the same name as the
Access Point. Under Power Saving Mode, you can select
Enabled to allow your adapter to go to sleep mode while the
Card doesn't proceed the data transmission. Or select
Disabled to make the Card never go to sleep mode.
3. If you choose Ad-Hoc, all clients should share the same SSID
name and should use the same channel. You may also select
which G Mode you wish to use: Mixed Mode or 802.11G
only. Select Mixed Mode on the Ad-Hoc mode will allow
both 802.11b and 802.11g computers on the network. But the
speed will be reduced. You can select 802.11G only for
27
Advertisement
Table of Contents
