Locating A Particular Point In A Track - Sony MDS-S39 Operating Instructions Manual

z
When you directly locate a track with a number over
25 Z
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter "0," press button 10.
Examples: • To play track number 30
Press >25 once, then 3 and 10.
• To play track number 100
Press >25 twice, then 1, 10 and 10.
z
You can extend the playing time during music scan
Z
While the deck is stopped, press M.SCAN repeatedly
until the playing time you want (6, 10 or 20 seconds)
appears in the display. Each press changes the time in
order of 6 to 20, then from 6 again.
z
To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
z
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total track number and total disc
playing time, remaining recordable time of the disc, or
disc name (see page 17).
Locating a Particular Point in a
Track
You can also use 0 and ) to locate a particular
point in a track during playback or playback pause.
To locate a point Press
) (forward) or 0 (backward)
While monitoring the
sound and keep pressing until you find
the point.
) or 0 and keep pressing
Quickly by observing
the display during until you find the point. There is
playback pause no sound output during this
operation.
Notes
• If the disc reaches the end while you are pressing )
during playback pause, "OVER" appears in the display.
Press 0 (or =) or turn AMS counterclockwise to go
back.
• If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
Playing MDs
0/)
)
0
§
·∏ p r
= +
19 EN