LOG SENSE
Note:
If there is no Note data in MIC for the Parameter Code specified in the CDB, a Check Condition status will be
1.
returned.
If the Allocation Length of the CDB is ZERO, a Good status is always returned and there is no data phase.
2.
If the Allocation Length of the CDB is non-ZERO and there is data in MIC for the Parameter Code, the user
data will be returned up to the size of the MIC data, as limited by the allocation length.
SONY AIT-5 drive SDX-1100V series Ver.1.0
6.Command Specification
6-39