Table of Contents
Advertisement
3.7. 3-Party Conference
The IP Phone has a 3-Party Conference feature that lets you converse with two other parties
simultaneously.
To set-up a conference:
o Place first call as normal.
o Press the Conference button. The call status changes to hold and you receive dial tone.
o Dial the number you want to join the conference.
o When the party answers, press the Conference button again to establish the conference.
To end your conference:
o Hang up the handset.
To cancel a conference, for example the second party does not answer or is busy:
o Press the Conference button.
3.8. Call Waiting
With Call Waiting configured, while you are in a call the IP Phone alerts you of an incoming call. You
receive a beep tone over the active conversation to indicate the new call. In addition, during the ring
signal, the LCD displays the incoming caller id so you know who is calling before you interrupt the current
call.
To answer an incoming call while on a call:
o Press the OK button when phone displays new call. The active call changes to the hold state and the
new call connects.
3.9. Redial
Your IP Phone saves the last number you dialed and allows you to redial the number with the touch of a
button.
To redial a call:
o Press the Redial button. The IP Phone activates the speakerphone and places the call.
o Lift the handset for privacy.
3.10. Speed Dial Buttons
Flexible buttons are available for configuration as feature buttons including Speed dial. Pressing a Speed
dial button sends the stored number to the call server for processing. Refer to your system administrator
for further information.
To place a call using Speed dial:
o Press the desired Speed dial flexible button. The IP Phone activates the speakerphone and places
the call.
o Lift the handset for privacy.
LIP-8002/8002A iPECS IP Phone
6
User Guide
Hide quick links:
Advertisement
Table of Contents
