Remote Control - Harman Kardon HK670 Owner's Manual

Remote Control

Independent Remote Control
The system remote of the HK670 can control the
amplifier and compatible Tuners, CD Players and
CD Recorders. The remote In jack of units without
an integrated IR receiver must be connected to
the amplifier's remote control output jack so that
the system remote control can operate them.
The Function Table below will show all functions
of the HK670 and external devices that can be
controlled by the HK670 remote.
Remote button functions
Button HK670
POWER/OFF Power On/Off
II (Fast Forward)
-
HH (Fast Reverse) -
JH (Skip Reverse)
-
IK (Skip Forward) -
A (Stop)
-
I (Play)
-
0 ~ 9 (Numeric Buttons) -
CD Source Select
CDR Source Select
AUX Source Select
TV Source Select
TUNER Source Select
PHONO Source Select
TAPE Source Select
CDP SELECT -
CDR SELECT -
RDS -
TUNER D -
TUNER E
-
VOLUME D Volume Up
VOLUME E
Volume Down
Only needed with CD Recorders
1)
REMOTE CONTROL
6
Important Notes:
• For controlling a tuner (only needed for the
numeric buttons), CD Recorder or CD Player
the appropriate input ("TUNER", "CDR" or
"CD") must have been selected with the
source buttons of the remote control (selecting
on the front panel is not sufficient).
• Note that DVD players or tape decks cannot
be controlled by the remote.
• To control a compatible CD Recorder "CDR"
must be selected as input and the drive to be
controlled (CDP or CDR) must be selected
appropriately with the "CDP SELECT" or "CDR
SELECT" buttons.
CD Player CD Recorder
- -
Fast Forward Fast Forward
Fast Reverse Fast Reverse
Skip Reverse Skip Reverse
Skip Forward Skip Forward
Stop Stop
Play Play
Track Select Track Select
- -
- -
- -
- -
- -
- -
- -
- CDP Drive Select 1)
- CDR Drive Select 1)
- -
- -
- -
- -
- -
Operating Conditions
The control unit operates effectively within a dis-
tance of 7 meters and an angle of 30° from the
amplifier. Using the control near fluorescent
lights may shorten this range, as will any dust or
dirt that accumulates on the front of the remote
control or the remote sensor area of the amplifi-
er. Also avoid blocking the line of sight between
amplifier and remote.
The control unit is powered by two AA batteries,
included with your amplifier. When you replace
weak batteries, replace both at the same time.
When the remote is to be unused for an extend-
ed period, remove the batteries to prevent dam-
age from corrosion.
Tuner
-
-
-
-
-
-
-
Preset Select
-
-
-
-
-
-
TUNER
-
-
-
RDS Display Select
Tuning Up
VOLUME
Tuning Down
-
-
1 2 3
POWER
4 5 6
OFF
7 8 9
CD
0
RDS AUX CDR
SELECT
CDP CDR TV
CD / CDR
TUNER
PHONO
TAPE
HK 670