To Open And Close The Hood - Dodge Charger SRT8 2013 Owner's Manual

216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• When you remove the Key Fob from the ignition (or
change the ignition to OFF, for vehicles equipped with
Keyless Enter-N-Go), the driver's seat will move to a
position 0.3 in (7.7 mm) forward of the rear stop if the
driver's seat position is between 0.9 in and 2.7 in (22.7
mm and 67.7 mm) forward of the rear stop. The seat
will return to its previously set position when you
place the ignition in the ACC or RUN position.
• The Easy Entry/Easy Exit feature is disabled when the
driver's seat position is less than 0.9 in (22.7 mm)
forward of the rear stop. At this position, there is no
benefit to the driver by moving the seat for Easy Exit
or Easy Entry.
Each stored memory setting will have an associated Easy
Entry and Easy Exit position.
NOTE: The Easy Entry/Easy Exit feature can be turned
on and off using the Uconnect System, refer to "Ucon-
nect Settings " in "Understanding Your Instrument
Panel" for further information.

TO OPEN AND CLOSE THE HOOD

Two latches must be released to open the hood.
1. Pull the hood release lever located under the left side
of the instrument panel.
Hood Release Lever