Installation; Unpacking - Halcro DM38 Owner's Manual

dm38

Installation

Ensure you have read the Important Safety Instructions section on page 2, prior to
installing your HALCRO™ amplifier.
If you require assistance in the unpacking and installation of your HALCRO™
amplifier, please contact your dealer.
PLEASE NOTE:
When lifting the unit, always use two people.
The unit must be lifted by placing your hands under the middle of the bottom
compartment. Do not lift the unit under the top compartment.

Unpacking

1. Unscrew the 4 knurled knobs at the base of each box. Then remove the upper part
of the container by lifting directly upwards, till it clears the top of the amplifier.
2. With an assistant, remove the plastic wrapping and foam pieces, then lift the
amplifier from the base of the container. Remove the plastic covering from the unit.
Please save it for later use.
3. Move the unit to its final location (see Positioning). White cotton gloves have been
provided to prevent marking the amplifier while moving it in to place.
Important
Do not connect any cables as yet.
Safely store the packaging so it may be used for future relocation of the unit, and
for shipping if service is required.
TM
Page 4