Use Of The Appliance - Electrolux ASF45090 User Manual

1)
Salt
1)
Rinse aid
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press a programme button,
the related indicator light comes on. Refer to
'Washing programmes' chapter for more da-
ta about the washing programmes.
Delay start button
Use the delay start button to delay the start
of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter
'Setting and starting a washing programme'.
Digital display
The display shows:
• the set level of the water softener.
• Remaining time to the end of the pro-
gramme.
• Activation/deactivation of the rinse aid dis-
penser (only with multitab function on).
• End of the washing programme. The dis-
play shows a zero.
• Number of hours in delay start.
• Fault codes.
Function buttons
Use the function buttons for these opera-
tions:
• To set the water softener. Refer to the
chapter 'Setting the water softener'.

Use of the appliance

Refer to the following instructions for each
step of procedure:
1. Make a check if the water softener level
is correct for the water hardness in your
area. If necessary set the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
Indicator lights
The indicator light comes on when it is necessary
to fill the salt container. Refer to 'Use of dishwash-
er salt'.
After you fill the container, the salt indicator light
can continue to stay on for some hours. This does
not have an unwanted effect on the operation of
the appliance.
The indicator light comes on when it is necessary
to fill the rinse aid. Refer to 'Use of rinse aid'.
• To cancel the washing programme in pro-
gress or a delay start in progress. Refer to
the chapter 'Setting and starting a washing
programme'.
• To activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab func-
tion'.
• To deactivate/activate the rinse aid dis-
penser, when multitab function is active.
Refer to the chapter 'Multitab function'.
Setting mode
When you press the on/off button and all
programme indicator lights come on, the ap-
pliance is in setting mode.
The appliance must be in setting mode for
these operations:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the rinse aid dis-
penser.
When you press the on/off button and only
one programme indicator light comes on,
cancel the programme to go back to the set-
ting mode. Refer to the chapter 'Setting and
starting a washing programme'.
4. Load cutlery and dishes into the dish-
washer.
5. Set the correct washing programme for
the type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
electrolux 5