Marathon RJ-88SC User Manual page 38

HAULER INSTRUCTIONS - HYDRAULIC TAILGATE OPERATION
WARNING
BODY BETWEEN THE TAILGATE AND THE CONTAINER.
INSTRUCTIONS FOR USING MAINTENANCE BAR.
1. Lower tailgate approximately 24" between container bottom and compactor
tailgate.
2 Remove locking pin from maintenance bar and slide bar toward compactor.
3. Align holes in the position collar and bar and insert pin.
4. Use a mop or similar cleaning device with a long handle to clean the seal.
5. Raise tailgate to relieve pressure on maintenance bar, remove pin, return bar to
retracted position and insert pin through collar and bar.
EXTENDED
MAINTENANCE BAR
RETRACTED
MAINTENANCE BAR
(FOR OPTIONAL HT UNITS)
:
NEVER PLACE ANY PART OF YOUR
DRAWING A
LOCKING PIN
DRAWING B
LOCKING PIN
4 HAULER INFORMATION
EXPLODED VIEW
DRAWING A
POSITION
COLLAR
EXPLODED VIEW
DRAWING B
POSITION
COLLAR
4-4