TUNER MODE
Selecting the tuner input source
Press »TUNER« to select TUNER as the input source.
1
– The most recently selected channel is activated (Last Station
Memory).
– Display: for example, »
Selecting a preset
Press »TUNER« to select the frequency band (FM or MW).
1
Select the preset with »PRESET«.
2
– Display: for example, »
station name.
Stereo/mono reception
When the hi-fi system receives an FM stereo station and no name is
displayed, »
FM stereo channel is weak, you can improve the sound quality by
switching to mono reception.
1
Press »
– Display: »
Press »
2
– Display: »
Note:
If the hi-fi is switched on from standby, it automatically goes to
mono reception.
RDS information
RDS (Radio Data System) is an information system which is transmit-
ted additionally by most FM stations.
When the hi-fi system receives an RDS station, the station name
appears in the display, for example »
Note:
It may take some time before RDS information is available.
Searching for RDS stations
To search for an RDS station, press »
1
necessary.
– If the reception is strong enough, the station name appears
after a short time.
_______________________________________
« with the frequency or the
« appears in the display. If the signal from the
ST/MO« to switch to mono reception.
« disappears.
ST/MO« to switch back to stereo reception.
«.
« or »
«.
«.
« or »
« as often as
5 a
s 6
21