Table of Contents
Advertisement
POWER SUPPLY
Rechargeable battery
operation
When operating the appliance
with the built-in nickel metal
hydride battery, only use the
power unit supplied for charging.
Check if the type plate on the
power supply unit corresponds to
your local mains supply.
1
Press the button
the appliance.
2
Plug the power cord into the ap-
pliance socket
supply unit into the wall socket.
– During the charging process,
the display
– Once the appliance is fully
charged, the charging display
does not switch off or change
its colour.
3
Pull the power cord out of the
the appliance socket
power supply unit out of the wall
socket.
----------------------------------------------------------------------------------------------------
to switch off
D
and the power
F
lights up red.
E
and the
F
Notes
Charge up the batteries com-
7
pletely (for at least 12 hours) be-
fore you first use them or if you
have not used them for a long
time.
Never charge the appliance for
7
longer than 24 hours.
The ambient temperature should
7
be between 5 °C and 40 °C.
Once you have used the appli-
7
ance, charging time is approx.
8 hours.
In its fully charged state, the ap-
7
pliance can run for approx. 60
minutes. It is not advisable to
charge the batteries after each
use. Only charge the batteries
when they are completely dis-
charged. This increases their
service life. Do not charge them
every day.
ENGLISH 21
Advertisement
Table of Contents
