Grundig TELINO BS 6100 User Manual page 49

SETTINGS
Select the reset function (call times, all, base, dial block,
3
settings, calls, telephone book, selected) using »
or » « and press »
programmed a PIN, you will be asked to enter it.
Depending on the function you select, the following is
reset:
»
call and the total of all calls are deleted.
» « – Entries in the repeat dial memory are
deleted.
» « – Entries in the telephone book (inclu-
ding T-Net settings and the hotline number) are deleted.
» « – Entries in the call list (not answering mach-
ine memos) are deleted.
» « – Settings which have been altered are
reset to their original state.
»
are reset to their original state.
» « – Provider, dial mode, exchange code, dial
block (number block and number release), answering
machine TAD, end of call, CLIP displays.
» « – As »
the main menu), babyphone, direct dial, alarm, tone,
illumination, language, base dial (in configuration).
The entries in the telephone book and the mobile units
which are logged in are not reset. If necessary, you can
carry out a "Reset" separately.
Press » « to confirm the security query.
4
Hold down »M
5
Note:
If you have reset »
for the memory of the answering machine to be auto-
matically deleted. Unplug the power unit from the
mains for a short time, then plug it in again.
_____________________________________
« to confirm. If you have
« – Entries on the duration of the last
« – Settings which have been altered
«, but additionally: dial tone (» « in
« to finish the setting.
« or » «, wait one minute
«
49 49