Unfolding The Chassis - Bugaboo Stroller User Manual

b Remove the wheel from the axle; repeat on the other side.
Important The big wheels cannot be removed from the axle
if the Bugaboo Gecko's parking brake is on.
inflating the tires
a. Unscrew the valve's black valve cap.
b Use an ordinary bicycle pump to inflate the pneumatic tires.
WARNING S
• Do not inflate to more than  bar (5 PSI).
deflating the tires
a. Press the inside of the big wheel's valve. This releases air.
Important Do not leave the valve caps lying around. Prevent children from putting them in their
mouths.
Important The pneumatic tires provide maximum suspension when inflated to the correct
pressure. When inflated to the correct pressure you can easily depress the tire with
your finger.

unfolding the chassis

Move the handlebar up to unfold the chassis. The big wheels are on the ground. Release the
handlebar and click it in position between the big wheels. The chassis is now folded up.
step 4 unfolding the chassis
a. Stand with the handlebar and big wheels in front of you.
b Pull the two white release knobs towards you and lift.
Release the knobs and raise the handlebar until it
'clicks' into the fastened position.
b
b
'click'

'click'