Advertisement
1
0
3
8
MHz
FM
.
2
1
0
3
8
MHz
FM
.
2
0
OPERATION
Switching on/off
Press »ON/OFF« to switch the device on and off.
1
Radio operation
Station selection
There are several ways to select the station with the device:
Briefly press »FWD/HR« or »REV/MIN« to set the frequency manual-
1
ly.
– The frequency changes in 50 kHz steps (CE version) or 100 kHz steps
(FCC version).
or
Press and hold down »FWD/HR« or »REV/MIN« then let go.
– The automatic station search begins and then stops at the next station
it finds.
or
Select a preset station by pressing
Storing stations
1
Tune to the station you want to store.
2
Press and hold down one of the station buttons
– The signal tone indicates that the station has been stored on the but-
ton.
3
To store more stations on the other buttons repeat steps
Timer settings
If the timer function is selected, the device switches off after the set time.
Activate the function by pressing »TIMER«.
1
– The device switches itself on and the minimum time you can set
(5 min.) appears for 5 seconds in the display.
To select the time, keep pressing »TIMER«.
2
– The device switches itself off after the set time has elapsed.
Note:
The timer can be set to 5, 10, 15, 20, 30 or 60 minutes. 5 seconds after
you finish the setting the clock or current frequency is displayed again.
To check how much time is left on the timer, press »TIMER« once. To
switch off before the set time, press »ON/OFF«.
__________________________
»STATION 1 ...
4«.
»STATION 1 ...
4«.
1
to 2.
13
Advertisement
