Basic Operation
DISP
Screen Display ON/OFF
1
Press the POWER button.
2
To turn off the POWER, press the POWER
button again.
•
If properly connected, the monitors main
POWER will turn off when the vehicle's
ignition switch is off.
•
After turning the system off, a slight ghost of
the image will remain temporarily. This is an
effect peculiar to LCD technology and is
normal.
•
Under cold temperature conditions, the
screen may lose contrast temporarily. After a
short warm-up period, it will return to
normal.
Adjusting the Volume
1
Adjust the volume level by pressing the
button.
4
-EN
Switching the Source
Press the SELECT button.
Each press of the button will cycle through the modes as
follows:
1
POWER
SELECT
2
or
If AUX3 SELECTION S/W of Black Box is
•
"IN" position
AUX1
AUX2
•
"OUT" position
AUX1
AUX2
If current screen mode is AUX3, and AUX3
SELECTION S/W is switched to "OUT" then
screen mode will be changed AUX1.
AUX3