Table of Contents
Advertisement
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
The display remains
dark, and the Start/
Stop button indicator
light does not come
on.
You are asked to enter
a code.
The display is dark.
Possible cause
There is no power to
the machine.
The washing machine
has turned itself off
automatically to save
energy.
Access via a code has
been activated.
The display has
switched off
automatically to save
energy (Standby
mode).
Problem solving guide
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
Switch the machine back on
again with the K button.
Enter the code and confirm
the entry. Deactivate the
code if you do not wish this
message to appear in the
display the next time the
machine is switched on.
Press a button. The machine
will come out of standby
mode.
45
Hide quick links:
Advertisement
Table of Contents
