Contents; Assembly; Drive Shaft/Power Head - Echo PE-230 Operator's Manual

c
ontents
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
___ 1, Edger Assembly
___ 1, Power Head
___ 1, Drive Shaft Assembly
___ 1, Plastic Bag (Co-Pack)
___ 1, Operator's Manual
___ 1, Safety Manual
___ 1, Emission Control Warranty Statement
___ 1, Warranty Registration Card
___ 1, Echo Power BlendX
___ 1, Front Handle
___ 1, Lower Bracket, Front Handle
___ 4, 5 x 35 mm screws
___ 4, 5 mm nuts*
___ 2, split pin
___ Assembly Tool (s)
___ Safety Glasses
* 5mm nuts may not be needed.
a
ssembly
/
drIve shaft power head
Parts Required: Power Head, Drive Shaft Assembly
1. Loosen, the bolt (A) at engine drive shaft clamp.
2. Carefully fit drive shaft assembly to engine making sure that
inner drive shaft engages into clutch mount.
nOTE
Lower gear housing and head assembly must be in line with the
engine.
3. Turn drive shaft housing so that center line of housing is midway
between the two arrows on shaft.
4. Tighten bolt (A).
2-stroke oil sample
TM
P e
ower
o ' M
Perator s
a
9
dger
anual
a