Battery Care; Corrosion Protection; Restoring Corrosion Protection; Underbody Maintenance - BMW 335d 2010 Service And Warranty Information

Hide thumbs Also See for 335d 2010:
Table of Contents

Advertisement

Battery Care

If your car is driven only for short distances of
less than 10 miles over a prolonged period of
time, without an occasional drive at highway
speeds, the engine's charging system will not
maintain the battery. Insufficient use of the
vehicle could result in short term starting
problems and, in the long term, could damage
the battery.
In case the car is not operated for several weeks,
it is advisable to:
consider using a proper trickle charger,
following the charger manufacturer's
instructions, to maintain the battery's state of
charge; or
consult your BMW center regarding battery
removal. Once removed, the battery must be
charged and stored in a cool, dry place where
it can be protected from freezing. If the battery
will be stored for over 3 months, it must be
recharged every 3 months, or else it will
become damaged and useless.
Please consult with your BMW center for further
guidance and information.

Corrosion Protection

Extensive corrosion protection measures
implemented by BMW now make it possible to
offer a 12-year unlimited mileage anti-corrosion
warranty against rust perforation on your vehicle
provided that the vehicle is maintained in
accordance with the provisions of the New
Vehicle Limited Warranty as outlined in the
Warranty Section of this Booklet (page 28).
The major degree of corrosion protection is due
to the electrophoretic dip painting process which
cathodically deposits paint particles on all body
parts, attracting paint particles into the minutest
cavities or seams. Body parts are designed to
provide optimum corrosion protection.
During manufacture, exterior body parts receive
an additional corrosion protection coat. Hood,
trunk, doors and other body parts are coated with
PVC and sealed from the outside.
All floor panels receive a resilient coating of PVC
for maximum protection against damage due to
stones, etc.
Corrosion protection materials tested over many
years are applied to the surfaces of cavities and
to the entire underside of the vehicle during and
after assembly.
Requirements for maintaining the 12-year
unlimited mileage anti-corrosion warranty are
outlined in the Warranty Section of this Booklet
(page 30).

Restoring corrosion protection

Please take care that anti-corrosion material is
replaced when your car is repaired after body or
chassis damage.
BMW NA will not accept any liability for any
parts and accessories not approved by BMW.

Underbody maintenance

The underbody has to be cleaned at least once a
year, in Spring, with plain water in order to
remove mud, chemical sediments and other
deposits. If those materials are not removed,
corrosion (rust) will occur on metal components.
Your BMW center will do this anti-corrosion
service for you.
Do not apply additional undercoating or
rust-proofing on or near the exhaust
manifold, exhaust pipes, catalytic converter or heat
shields. During driving, the substance used for
undercoating could overheat and cause a fire.

BMW Roadside Assistance

The BMW Roadside Assistance Program
reflects BMW's commitment to your
complete satisfaction with the BMW
ownership experience.
It is available for U.S. version BMWs in all
50 states, Canada, and Puerto Rico 24 hours a
day, 365 days a year.
It is a valuable benefit provided to you at no
additional cost. (Subject to certain limitations and
exclusions noted on page 22).
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents