Draytek Vigor2830 Series Quick Start Manual page 31

4. On the next page as shown below, please select the WAN interface that you use. If
DSL interface is used, please choose WAN1; if Ethernet interface is used, please
choose WAN2; if 3G USB modem is used, please choose WAN3. Then click Next
for next step.
WAN1, WAN2 and WAN3 will bring up different configuration page. Refer to the
following for detailed information.
F o r W A N 1
F o r W A N 1
Choose WAN1 and click Next to display the following page. Please select the
appropriate Internet access type according to the information from your ISP. For
example, you should select PPPoE mode if the ISP provides you PPPoE interface.
Then click Next for next step.
23
Vigor2830 Series Quick Start Guide