Cmos Rtc & Isa Cfg Cmos Sram; Speaker Connector Installation; Power Led Connector Installation; Turbo Switch Connector Installation - Gigabyte GA - 586ATX2 User Manual

Pentium processor pci - isa bus mainboard

Table of Contents

GA-586ATX2

The CPU is a sensitive electric component and it can be easily

damaged by static electricity, so users must keep it away from

metal surface when the CPU is installed onto mainboard.

When the user installs the CPU on socket, please notice that the

PIN 1 of CPU is in the same corner as the PIN 1 of socket!

Before the CPU is installed, the mainboard must be placed on a flat

plane in order to avoid being broken by the pressure of CPU

installation.

3.7. CMOS RTC & ISA CFG CMOS SRAM

Built-in Real Time Clock (RTC) With 256B CMOS SRAM in PIIX4

There is always a speaker in AT system for sound purpose. The 4 - Pins

connector SPK is used to connect speaker. The speaker can work well in

both direction of connector when it is installed to the connector SPK on

mainboard.

There is a system power LED light on the panel of case. The power LED will

light on when system is powered-on. The connector should be installed to

PWR of mainboard in correct direction.

Function Reserved

The TURBO LED on panel can indicate the current speed status of system.

The TURBO LED connector should be installed to TD in correct direction.

3-10

Table of Contents

Chapters

Table of Contents