Table of Contents
Advertisement
CPU Internal Cache / External Cache
These two categories speed up memory access. However, it depends on
CPU / chipset design. The default value is Enabled.
Enabled
Enable cache function.
Disabled
Disable cache function.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on
the computer. If it is set to Enable, BIOS will shorten or skip some check
items during POST. The default value is Enabled.
Enabled
Enable quick POST.
Disabled
Normal POST.
Boot Sequence
This category determines which drive computer searches first for the
disk operating system (i.e., DOS). The default value is A,C,SCSI.
A,C,SCSI
System will first search for floppy disk drive then
hard disk (C) drive and SCSI drive.
C,A,SCSI
System will first search for hard disk (C) drive then
floppy disk drive and SCSI drive.
C,CDROM,A
System will first search for hard disk (C) drive then
CDROM drive and floppy disk drive.
CDROM,C,A
System will first search for CDROM drive then hard
disk (C) drive and floppy disk drive.
D,A,SCSI
System will first search for hard disk (D) drive then
floppy disk drive and SCSI drive.
E,A,SCSI
System will first search for hard disk (E) drive then
floppy disk drive and SCSI drive.
F,A,SCSI
System will first search for hard disk (F) drive then
floppy disk drive and SCSI drive.
SCSI,A,C
System will first search for SCSI drive then floppy
disk drive and hard disk (C) drive .
SCSI,C,A
System will first search for SCSI drive and hard disk
(C) drive then floppy disk drive .
C only
System will only search for hard disk (C) drive.
LS/ZIP,C
System will first search for floppy disk drive (LS) or
ZIP drive then hard disk (C) drive.
4-11
BIOS Configuration
Advertisement
Table of Contents
