Gigabyte 5AA User Manual page 67

5AA
Quick Boot
The default value is Disabled.
Enabled Enabled Quick Boot Function.
Disabled Disabled Quick Boot Function.
Bootup Num-Lock
Default value is On.
On Keypad is number keys.
Off Keypad is arrow keys.
Floppy Drive Swap
The default value is Disabled.
Enabled Floppy A & B will be swapped under DOS.
Disabled Floppy A & B will be normal definition.
Floppy Drive Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80
tracks. 360 type is 40 tracks while 720 , 1.2 and 1.44 are all 80 tracks.
The default value is Enabled.
Enabled BIOS searches for floppy disk drive to determine if it is 40
or 80 tracks. Note that BIOS can not tell from 720, 1.2 or
1.44 drive type as they are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by
track number. Note that there will not be any warning
message if the drive installed is 360
Floppy Access Control
The default value is Normal.
Normal Set Floppy Access Control : Normal.
Read Only Set Floppy Access Control : Read Only.
.
4-10