Dram Installation - Gigabyte 6ZMA User Manual

SPK: Speaker Connector
PIN 1 : VCC (+)
1 +
PIN 2 : VCC
PIN 3 : Data
PIN 4 : Data ( )
SPK : Internal Speaker Connector (Default)
PIN 1 : VCC (+)
1 +
PIN 2-PIN3 : Short
PIN 4 : Data ( )
HD: IDE Hard Disk Active LED
1
PIN 1: LED anode (+)
PIN 2: LED cathode ( )
GN: Green Function Switch
Open : Normal operation
Short : Entering Green Mode
GD: Green LED
PIN 1 : LED anode (+)
PIN 2 : LED cathode ( )
1

3.4. DRAM INSTALLATION

The mainboard can be installed with 16 / 32 / 64 / 128 / 256 MB 168 pins
DIMM module DRAM, and the DRAM speed must be 67~100 MHz for
SDRAM. The DRAM memory system on mainboard consists of bank 0 ,
bank 1.
Since 168 pins DIMM module is 64 bits width, using 1 PCS which can match
a 64 bits system. The total memory size is 16MB ~ 256MB SDRAM. The
DRAM installation position refer to Figure 3.1, and notice the Pin 1 of DIMM
Hardware Installation
3-7