Panasonic DMP-BD35 Operating Instructions Manual page 25

"Sound"
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range ( 34) for late night viewing.
Digital Audio Output ( 16)
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/ Select whether Dolby Digital, Dolby
Dolby TrueHD Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
DTS/DTS-HD
Resolution Audio or DTS-HD Master
Audio is output in "Bitstream" or
"PCM" format.
[Note]
≥Not making the proper settings may
result in noise.
≥If the unit is connected with the HDMI
AV OUT terminal, the specifications of
the connected equipment take
preference over this unit and audio
selected in these items may not be
output (e.g., when a television is
connected, the HDMI audio output of
this unit is limited to down-mixed 2ch.)
MPEG Audio
BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
more.
≥Signals are converted to 48 kHz despite the settings across in
the following cases:
– when the signals have a sampling frequency of over 96 kHz
– when the disc has copy protection
– when "BD-Video Secondary Audio" is set to "On"
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" is
set to "Bitstream", there are no downmix effects for the outputted
audio.
≥The audio will be outputted in "Stereo" in the following cases.
– AVCHD playback
– [BD-V]: Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
"Display"
On-Screen Messages
Choose whether to show status messages automatically.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to "On", the masked-off area on the screen
becomes gray.
[Only when connecting with an HDMI cable or a component
video cable and "HDMI Video Format" (
mode than "576p/480p", or "Component Resolution" (
set to "720p" or "1080i"]
FL Display
Changes the brightness of the unit's display.
Software Licence
≥On
≥Auto:
≥Bitstream:
Select "Bitstream" when the connected equipment can decode the
respective audio format.
– Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
≥PCM:
Select "PCM" when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether or
not they can decode each of the audio formats.
≥Bitstream:
≥PCM:
≥On:
≥Off:
15)
≥On:
≥Off:
≥Stereo:
≥Surround encoded: When connected to equipment that supports the
≥Automatic
≥On:
If there is no operation for 10 minutes or more, the displayed screen
switches to the other states automatically.
– When the Direct Navigator or FUNCTIONS menu is displayed, the
display returns to the screen saver mode.
26) is set to any other – When CD or MP3 is played, the display returns to the screen saver
26) is mode. (Playback continues.)
– When still pictures are shown (except for slideshows), the display returns
to the Direct Navigator screen.
≥Off
≥Bright
≥Dim:
≥Automatic:
Information about the software used by this unit is displayed.
≥Off
Effective only when Dolby TrueHD is played.
When connected to equipment with a built-in MPEG
decoder.
When connected to equipment without a built-in MPEG
decoder.
The primary audio and secondary audio are mixed and output.
The sampling frequency is converted to 48 kHz.
The clicking sound on the menu and secondary audio are not
output.
Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
When connected to equipment that does not support
the virtual surround function.
virtual surround function (Dolby Pro Logic, DTS
Neo: 6, etc.)
≥Off
The display is dimmed.
The display is dimmed during playback and bright
except playback.
RQT9248
25