Axis 5400+ User Manual page 90

Management and Configuration
Viewing
the Status file
Performing resets
90
The status command shows which printer port the logical printers are assigned
to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5400+/AXIS 5600+ by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to perform
hard resets, and to reset the print server's parameters to its default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 5400+/AXIS 5600+ by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. Restart the print server's protocols by typing:
softreset
Replace the command in step 3 above with
the other two reset operations.
or
telnet <IP address>
or
telnet <IP address>
hardreset
AXIS 5400+ / AXIS 5600+ User's Manual
in a DOS window
and .)
root pass
in a DOS window
and .)
root pass
to perform
or
default