Table of Contents
Advertisement
8. A pop-up displays to confirm the
pairing was successful.
9. After initial pairing, a pop-up on
the device may appear to accept
and allow the radio permission
to download the phone device
phone/address book for later
use. Press Always Accept,
if offered on the device is
recommended for normal use.
No other paired device can see
the other device s such
information. This information is
also not accessible if the device
from which this information
originated is not currently paired,
in range and connected.
®
10. For Blackberry
devices, turn
off the Automatic Echo control
from within the Device menu in
the phone. Leaving this feature
on can cause noise problems
during hand free calls.
For information about how to
navigate the menu system using the
infotainment controls, see
.
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls can
be made using OnStar Hands-Free
Calling, if available. See OnStar in
the owner manual.
Up to ten cell phones can be
paired to the Bluetooth system.
Up to a total 10,000 phone
contacts and numbers can be
stored across 10 paired phones.
The system will attempt to
connect to the last known
connected device if multiple
paired devices are in range of
the system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
Advertisement
Table of Contents
